Skip to content
BastionSec
Contact us
Managed security · Network & WiFi

A business network designed right, segmented and kept under control. Without an in-house network team.

We configure NGFW firewalls, VLAN segmentation, enterprise WiFi with WPA3/802.1X and secure remote access via VPN/ZTNA. Then we manage and monitor it. Important: we configure and manage, the hardware is yours to choose.

  • VLAN segmentation: guests, devices and production on separate networks.
  • Enterprise WPA3/802.1X WiFi: no shared password stuck on the wall.
  • Transparent monthly management fee. 'On request' for complex networks.
Contact usSee Zero Trust access

Who this is for

The 'missing middle': startups and SMBs with an office (or several sites) but no in-house network/security team to design and run the infrastructure. Sound familiar?

Flat network, everything on one WiFi

Guests, phones, cameras and work PCs on the same network with a shared password. We segment it properly.

A new office to set up

You open or move a site and need to stand up a secure network. We design, configure and then manage it.

Hybrid work and fragile remote access

Improvised VPNs or exposed direct access. We stand up secure remote access via VPN/ZTNA.

What 'managed network and WiFi' means

The network is the company's circulatory system. A flat network, meaning everything on the same segment with a shared WiFi, means a single compromised device can reach everything else. Segmentation and a well-configured perimeter radically change your security posture.

We design, configure and manage the network: NGFW firewalls with sensible rules, VLANs to separate the different worlds, enterprise WiFi with individual authentication and encrypted remote access. We don't sell access points, firewalls or routers: the hardware is yours to choose and buy, based on our design: we configure it, secure it and manage it.

What's included

  • Network design: topology, VLAN segmentation, addressing, inter-segment traffic rules.
  • NGFW (Next-Generation Firewall) configuration: rules, filtering, IPS, traffic inspection.
  • Enterprise WiFi with WPA3 and 802.1X: every user or device authenticates individually, no shared password.
  • Separate networks for guests, IoT/camera devices and the production environment.
  • Secure remote access via VPN and/or ZTNA (Zero Trust Network Access), the modern alternative to classic VPN.
  • Edge DNS and perimeter protection (Cloudflare category and similar) where relevant.
  • Network monitoring and log collection: visibility into what's happening, the basis for detection.
  • Network documentation and operational runbooks, kept up to date.

How it works

A staged method. People design and validate the architecture; tooling automates configuration and log collection.

  1. 1

    Assessment

    We map the current network, connected devices and exposures; we gather each site's requirements.

  2. 2

    Design & configuration

    We design segmentation and rules, configure NGFW, VLANs, 802.1X WiFi and remote access.

  3. 3

    Hardening & rollout

    We apply best practices and migrate traffic to the new segments without disrupting work.

  4. 4

    Management & monitoring

    We keep rules and firmware current, monitor the logs and handle changes and new sites.

Stack & standards

We work at the technology-category level, not locked to a single vendor: enterprise-class NGFW firewalls, enterprise WiFi controllers and access points, edge security and DNS platforms (Cloudflare category and similar) and ZTNA solutions.

References: WPA3 and IEEE 802.1X for enterprise WiFi authentication, segmentation and least privilege at the network level, NIST SP 800-207 (Zero Trust Architecture) for the ZTNA model, and vendor hardening guides for perimeter configuration. We describe technologies by category: we pick the right tools for your network, without claiming partnerships we don't hold.

What we DON'T do: the boundaries

Honesty about boundaries. We're a security provider, not a hardware reseller.

We don't sell hardware

We don't sell access points, firewalls, routers or switches. The hardware is yours to choose and buy, based on the design we give you.

We don't do cabling

Physical cabling and building work go to an installer. We come in on configuration, security and management.

No 24/7 SOC promises

We do network monitoring and log collection; for continuous detection and response there's a dedicated service, described honestly.

We design, configure, secure and manage the network. The hardware is yours to choose: we tell you what's needed and why, but purchase and ownership stay with you.

Timeline & model

  1. 1

    Design & setup : project, typically 2-5 weeks

    Depends on the number of sites, network complexity and the hardware in play.

  2. 2

    Ongoing management : monthly management fee

    Rule and firmware updates, monitoring, change management and support included.

  3. 3

    Complex or multi-site networks : on request

    Multiple sites, specific requirements or special integrations: we size it together.

When you write to us we map your network and give you an honest 'from' price.

Frequently asked

So do you sell the firewalls and access points?

No. We don't sell hardware: the access points, firewall and switches are yours to choose and buy. We tell you what's needed based on the design, then configure, secure and manage it. We keep vendor independence.

Why segment the network into VLANs?

A flat network lets a compromised device (say a camera or a guest's PC) reach everything else. VLANs separate the worlds: guests, IoT, production. It's one of the highest-impact security measures.

What's 802.1X WiFi and why is it better than a shared password?

With 802.1X (and WPA3 Enterprise) each user or device authenticates with individual credentials, not one shared password on the wall. You can revoke a single access without changing everyone's password.

What's the difference between VPN and ZTNA?

Classic VPN grants access to a network segment; ZTNA (Zero Trust Network Access) grants access to individual applications, verifying identity and device on every request. ZTNA is the modern evolution, per NIST SP 800-207.

Can you manage multiple sites?

Yes. We design a consistent architecture across sites and manage it centrally. Multi-site or particularly complex networks we size 'on request'.

Do you monitor the network 24/7?

We do network monitoring and log collection as part of management. For continuous detection and incident response there's a dedicated service: we describe it for what it really is, without promising a 24/7 SOC before the real capacity exists.

Go deeper

Zero Trust access

The ZTNA model for remote access, per NIST SP 800-207: identity and device on every request.

Learn more

Server & Infrastructure

A secure network protects the infrastructure running on it: servers, cloud, backups and high availability.

Learn more

Detection & Response

Network logs flow into monitoring and incident response on a retainer.

Learn more

Let's secure your network. Talk to us.

Tell us your need: we map your network and tell you what you actually need, honestly.

Contact us